Microcom 428TM Manual do Utilizador descarregar pdf (Página 12)

Document #101-0237 12 03/02/2012

IX. Maintenance - 428T

Area/Component Interval/Frequency Process/Method

Print Head After every roll of media or

every 512 feet of tag stock or

fanfold media.

Use a foam or cotton tipped

swab and Isopropyl Alcohol.

Driver Roller After every roll of media or

every 512 feet of tag stock or

fanfold media.

Use a foam, cotton tipped

swab or lint-free cloth damp-

ened with Isopropyl Alcohol

Peel Edge As Required Use a foam, cotton tipped

swab or lint-free cloth damp-

ened with Isopropyl Alcohol

Interior Cleaning As Required Use compressed air, static

protected vacuum cleaner,

soft-bristle brush, and/or

lint-free cloth dampened with

Isopropyl Alcohol.

Exterior Cleaning As Required Lint-free cloth dampened with

a mild, non-abrasive general

purpose cleaner.

Note: When any maintenance is required the printer and printer bracket will

be required to be removed from the Ticket Vendor.

Cleaning Print Head

1. Remove any installed media. (tickets or tags)

2.Turn “Off” power to printer.

3. Press the “Retainer Spring” to allow the “Head Pivot Shaft” to pressed “IN” to allow the release of the Print

Head Assembly.

4. Clean print head with swab and Isopropyl Alcohol.

Internal Cleaning

1. Remove any installed media. (Tickets or Tags)

2.Turn “Off” power to printer.

3. Press the “Retainer Spring” to allow the “Head Pivot Shaft” to pressed “IN” to allow the release of the Print

Head Assembly.

4. Clean Drive Roller with swab and Isopropyl Alcohol.

Internal Cleaning II

1. Remove any installed media. (Tickets or Tags)

2. Turn “OFF” power to printer.

3. Press the “Retaining Spring” to allow the “Head Pivot Shaft” to be pressed “IN” to allow the release of the

Print Head Assembly.

4. Clean interior by using compressed air, static protected vacuum cleaner, soft-bristle brush and/or lint free

cloth dampened with Isopropyl Alcohol.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Comentários a estes Manuais

Sem comentários

Microcom 428TM Manual do Utilizador Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Microcom 428TM