Microcom 428TM Manual do Operador descarregar pdf (Página 127)

Chapter 5 Printer Commands

428TM Operator’s Manual - 880042-0141 5-57

How to save a FONT to FLASH:

1. Create the special FONT download file with FLASH set as the

memory destination,

2. Send the file to the printer using a standard communications

program set for 8 data bits, no parity, 1 stop bit.

Hint: After the FONT file has been sent, the ^D119 command may be used to verify

that the new FONT is now available in FLASH.

^A ^D COMMAND

XX 136 Delete a FONT from RAM.

^A0 deletes all FONTS from RAM

^Axx deletes the FONT stored in RAM Slot #xx

Valid values for Axx are 1 to 255. The user selects the RAM memory Slot #xx

that will be cleared.

Hint: After the FONT file has been deleted, the ^D119 command may be used to

verify that Slot #xx is now available in RAM. The FONT may extend over

several slots and the ^D119 will indicate how many slots are used.

XX 137 Delete a FONT from FLASH.

^A0 deletes all FONTS from FLASH

^Ax deletes the FONT stored in FLASH Slot #x

Valid values for Axx are 1 to 255. The user selects the FLASH memory Slot

#xx that will be cleared.

Hint: After the FONT file has been deleted, the ^D119 command may be used to

verify that Slot #xx is now available in FLASH. The FONT may extend over

several slots and the ^D119 will indicate how many slots are used.

XX 138 Process a FLASH FORMAT.

^Axx references the FORMAT file stored in Slot #xx

Valid values for Axx are 1 to 128.

Label FORMATS are saved into FLASH Slots 1 to 128. Each of these

FORMAT slots specifies how to build the dot rows that are used to print a label

on the printer.

This command tells the printer to take the Label FORMAT file in Slot #xx and

build up its image in the printer’s slice buffer. After this command is finished,

the label may be printed by sending the ^C print command.

NOTE: If the FORMAT file contains a print command, then the label will be

printed at the end of this command.

XX 139 Send a FLASH FORMAT to the communications port.

^Axx references the FORMAT file stored in Slot #xx

Valid values for Axx are 1 to 128.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 242 243

Sem comentários

Microcom 428TM Manual do Operador Página 127