Microcom 466 Manual do Utilizador Página 1

NANO-GX User Manual Page iIEI Technology Corp. User Manual MODEL: NANO-GX/GXTC EPIC SBC with AMD® Geode™ GX466 333 MHz CPU, CRT/LVDS, LAN, SATA, US

NANO-GX User ManualPage x List of Tables Table 1-1: NANO-GX Model Specifications...

NANO-GX User ManualPage 100  640 x 480 (DEFAULT)  800 x 600  1024 x 768  x Data Type [Normal] The Data Type option can only be configured

NANO-GX User Manual Page 1015.5 Integrated Peripherals Use the Integrated Peripherals menu (BIOS Menu 7) to change the configuration options for the

NANO-GX User ManualPage 102  Drive PIO Mode [Auto] Use the Drive PIO Mode options below to select the Programmed Input/Output (PIO) mode for the

NANO-GX User Manual Page 103 IT8888 ISA Decode Memory [Press Enter] Use the IDE ISA Decode Memory option to open the IT8888 ISA Decode Memory menu

NANO-GX User ManualPage 104  Disabled  3F8/IRQ4  2F8/IRQ3 (DEFAULT)  3E8/IRQ4  2E8/IRQ3  Auto  x UR2 Duplex Mode [Half] Use the UR2 Duple

NANO-GX User Manual Page 105 ECP The parallel port operates in the extended capabilities port (ECP) mode. The ECP mode supports bi-directional co

NANO-GX User ManualPage 106  Onboard Serial Port 3 [3E8] Use the Onboard Serial Port 3 option to select the base addresses for serial port 3. 

NANO-GX User Manual Page 107 IRQ5 Serial port 4 IRQ address is IRQ5  IRQ7 DEFAULT Serial port 4 IRQ address is IRQ7  IRQ10 Serial port 4 IRQ

NANO-GX User ManualPage 108  Serial Port 6 Use IRQ [IRQ10] Use the Serial Port 6 Use IRQ option to select the interrupt address for serial port 6.

NANO-GX User Manual Page 109 BIOS Menu 8: IT8888 ISA Decode IO The IT8888 ISA Decode IO menu has the following common options:  Decode I/O Space N

NANO-GX User Manual Page xiTable 3-28: Mini-DIN 6 PS/2 Connector ...

NANO-GX User ManualPage 110  Disabled The Nth IO set is disabled and the system resources are reallocated to other applications.  Enabled (DEFAU

NANO-GX User Manual Page 1115.5.2 IT8888 ISA Decode Memory NOTE: Five PCI-104 devices can be stacked onto the NANO-GX motherboard. If these devices

NANO-GX User ManualPage 112  Decode Memory Addr. N [15:0]  Decode Memory Size N Where N is an integer in the set [1, 2, 3, 4, 5] and represents

NANO-GX User Manual Page 113 64 KB  128 KB  256 KB  512 KB  1 MB  2 MB 5.5.3 IT8888 DDMA NOTE: Five PCI-104 devices can be stacked onto the

NANO-GX User ManualPage 114 BIOS Menu 10: IT8888 DDMA The IT8888 DDMA menu has the following option:  DDMA N Support Where N is an integer in the

NANO-GX User Manual Page 115 BIOS Menu 11: Power Management Setup  Power-On by Alarm [Disabled] Use the Power-On by Alarm option to specify when t

NANO-GX User ManualPage 116 5.7 PnP/PCI Configurations Use the PnP/PCI Configurations menu (BIOS Menu 12) to set the plug and play, and PCI options.

NANO-GX User Manual Page 117 x IRQ Resources [Press Enter] The IRQ Resources option (BIOS Menu 13) can only be selected if the Resources Controll

NANO-GX User ManualPage 118  PCI Device (DEFAULT) The IRQ is assigned to legacy ISA for devices compliant with the original PC AT bus specificatio

NANO-GX User Manual Page 119 Current CPU Temperature  Fan Speed The following temperatures are monitored:  Fan Speed  Voltages The following v

NANO-GX User ManualPage xii BIOS Menus BIOS Menu 1: Award BIOS CMOS Setup Utility ...

NANO-GX User ManualPage 120 Appendix A A BIOS Options

NANO-GX User Manual Page 121Below is a list of BIOS configuration options in the BIOS chapter. 　 Load Fail-Safe Defaults ...

NANO-GX User ManualPage 122 　 Onboard USB2.0 (EHCI) [Enabled]...9

NANO-GX User Manual Page 123　 Power-On by Alarm [Disabled] ...

NANO-GX User ManualPage 124 Appendix B B Terminology

NANO-GX User Manual Page 125AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. ACPI Advanced Configuration and Po

NANO-GX User ManualPage 126 DMA Direct Memory Access (DMA) enables some peripheral devices to bypass the system processor and communicate directly w

NANO-GX User Manual Page 127LCD Liquid crystal display (LCD) is a flat, low-power display device that consists of two polarizing plates with a liqui

NANO-GX User ManualPage 128 Appendix C C Digital I/O Interface

NANO-GX User Manual Page 129C.1 Introduction The DIO connector on the NANO-GX is interfaced to GPIO ports on the Super I/O chipset. The DIO has both

NANO-GX User Manual Page 13Chapter 1 1 Introduction

NANO-GX User ManualPage 130 C.3 Assembly Language Samples C.3.1 Enable the DIO Input Function The BIOS interrupt call INT 15H controls the digital I

NANO-GX User Manual Page 131Appendix D D Watchdog Timer

NANO-GX User ManualPage 132 NOTE: The following discussion applies to DOS environment. IEI support is contacted or the IEI website visited for spec

NANO-GX User Manual Page 133 NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. EXAMPLE PROGRA

NANO-GX User ManualPage 134 Appendix E E Hazardous Materials Disclosure

NANO-GX User Manual Page 135E.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury T

NANO-GX User ManualPage 136 Toxic or Hazardous Substances and Elements Part Name Lead (Pb) Mercury (Hg) Cadmium(Cd) Hexavalent Chromium(CR(VI)) Poly

NANO-GX User Manual Page 137此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品可能包含有较短的环境

NANO-GX User ManualPage 14 1.1 NANO-GX CPU Board Overview The EPIC form factor NANO-GX AMD Geode™ GX 466 is a highly integrated embedded computer sp

NANO-GX User Manual Page 15 operating reliably in harsh industrial environments with ambient temperatures as high as 60°C  rebooting automatical

NANO-GX User ManualPage 16 Figure 1-2: NANO-GX CPU Board Overview (Solder Side) 1.2.1 NANO-GX CPU Board Connectors The NANO-GX has the following co

NANO-GX User Manual Page 17 1x PC/104-Plus power input connector  1x Reset button  2 x Serial ATA connectors  4 x Serial port RS2-232 connec

NANO-GX User ManualPage 18 Figure 1-3: NANO-GX Dimensions (mm) 1.3.1 External Interface Panel Dimensions External peripheral interface connector pa

NANO-GX User Manual Page 191.4 Data Flow The NANO-GX motherboard comes with an AMD Geode™ GX 466 and an AMD Geode™ CS5536 linked together by the Ge

NANO-GX User ManualPage ii Revision Date Version Changes 23 June, 2009 1.10 Modified SATA IC and BIOS December 2006 1.00 Initial release

NANO-GX User ManualPage 20 1.4.1 Technical Specifications: NANO-GX motherboard technical specifications are listed below. Specification/Model NANO-

NANO-GX User Manual Page 21Specification/Model NANO-GX / GXTC Display One VGA One LVDS (internal, NANO-GX only) One TTL LCD (internal, NANO-GX only

NANO-GX User ManualPage 22 Chapter 2 2 Unpacking

NANO-GX User Manual Page 232.1 Anti-static Precautions WARNING! Static electricity can destroy certain electronics. Make sure to follow the ESD pre

NANO-GX User ManualPage 24 2.3 Packing List NOTE: If any of the components listed in the checklist below are missing, do not proceed with the insta

NANO-GX User Manual Page 251 Dual RS-232 Cable 1 Mini jumper pack 1 KB/MS Y cable 2 SATA cable 1 SATA power cable 1 Quick Installation Guid

NANO-GX User ManualPage 26 Chapter 3 3 Connectors

NANO-GX User Manual Page 273.1 Peripheral Interface Connectors Figure 3-1 and Figure 3-2 show all the onboard peripheral connectors, rear panel peri

NANO-GX User ManualPage 28 3.1.1 Peripheral Interface Connectors Table 3-1 shows a list of the peripheral interface connectors on the NANO-GX. Detai

NANO-GX User Manual Page 29External Interface Panel Connectors Table 3-2 lists the rear panel connectors on the NANO-GX. Detailed descriptions of th

NANO-GX User Manual Page iiiCopyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improv

NANO-GX User ManualPage 30 Figure 3-3: 12V Power Input Connector Pinouts PIN NO. DESCRIPTION 1 GROUND 2 GROUND 3 Power IN(+12V) 4 Power IN(+12V)

NANO-GX User Manual Page 31 Figure 3-4: ATX Power Button Connector Location PIN NO. DESCRIPTION 1 ATX Power button + 2 ATX Power button - Table

NANO-GX User ManualPage 32 Figure 3-5: ATX Suspend Power Input Connector Location PIN NO. DESCRIPTION 1 5VSB 2 NC 3 PS_ON Table 3-5: ATX Suspend

NANO-GX User Manual Page 33 Figure 3-6: Audio Connector Pinouts (10-pin) PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 LINE_OUT_R 2 LINE_IN_R 3 GROU

NANO-GX User ManualPage 34 Figure 3-7: Audio CD-In Connector Pinouts (4-pin) PIN NO. DESCRIPTION 1 CD Signal (Left) 2 Ground 3 Ground 4 CD Sign

NANO-GX User Manual Page 35 Figure 3-8: Backlight Inverter Connector Pinout Location PIN NO. DESCRIPTION 1 BL_ADJ (DEFAULT: GND) 2 GND 3 VCC12 4 G

NANO-GX User ManualPage 36 Figure 3-9: CF Card Socket Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 GROUND 26 GND 2 DATA 3 27 DATA 11 3

NANO-GX User Manual Page 3718 SA2 43 DRQ 19 SA1 44 DACK# 20 SA0 45 HDD_ACTIVE# 21 DATA 0 46 CABLEID 22 DATA 1 47 DATA 8 23 DATA 2 48 DATA 9 24

NANO-GX User ManualPage 38 PIN NO. DESCRIPTION PIN NO. DESCRIPTION1 GND 2 VCC5 3 Output 0 4 Output 1 5 Output 2 6 Output 3 7 Input 0 8 Input 1

NANO-GX User Manual Page 39PIN NO. DESCRIPTION 1 Fan Speed Detect 2 +5V 3 GND Table 3-11: +5V Fan Connector Pinouts 3.2.10 IDE Connector (44-pin)

NANO-GX User ManualPage iv Table of Contents 1 INTRODUCTION...

NANO-GX User ManualPage 40 11 DATA 3 12 DATA 12 13 DATA 2 14 DATA 13 15 DATA 1 16 DATA 14 17 DATA 0 18 DATA 15 19 GROUND 20 N/C 21 IDE

NANO-GX User Manual Page 41 Figure 3-13: Infrared Connector Pinout Locations PIN NO. DESCRIPTION 1 VCC5 2 NC 3 IR-RX 4 GND 5 IR-TX Table 3-13: Infr

NANO-GX User ManualPage 42 Figure 3-14: Keyboard/Mouse Connector Location PIN NO. DESCRIPTION 1 VCC5 2 Mouse DATA 3 Mouse Clock 4 Keyboard DATA 5

NANO-GX User Manual Page 43Figure 3-15: Parallel Port Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 PRN_STB# 2 PRN_AFD# 3 PRN_PD0

NANO-GX User ManualPage 44 The PC/104 slot enables a PC/104 compatible expansion module to be connected to the board. The PCI-104 slot enables a PCI

NANO-GX User Manual Page 4510 IOCHRDY GROUND MEMR- DREQ0 11 AEN SMEMW- MEMW- DACK5- 12 SA19 SMEMR- SD8 DRREQ5 13 SA18 IOW- SD9 DACK6- 14 SA17 IO

NANO-GX User ManualPage 46 A8 VCC3 B8 BE1# C8 AD15 D8 VCC3 A9 PULL 3V B9 GND C9 PULL 3V D9 PAR A10 GND B10 PULL 3V C10 VCC3 D10 PULL 3V

NANO-GX User Manual Page 47The PC/104 power input connector provides power to the PC/104 expansion module installed on the PC/104 slot. Figure 3-17

NANO-GX User ManualPage 48 Figure 3-18: Power and HDD LED Connector Location PIN NO. DESCRIPTION 1 VCC5 2 GROUND 3 PWRLED+ 4 PWRLED- 5 HDD LED+ 6

NANO-GX User Manual Page 49 Figure 3-19: Reset Button Connector Locations PIN NO. DESCRIPTION 1 Reset button + 2 Reset button - Table 3-20: Rese

NANO-GX User Manual Page v3.2.8 Digital Input/Output (DIO) Connector... 37 3.2.9 Fan Connec

NANO-GX User ManualPage 50 Figure 3-20: SATA Drive Connector Locations PIN NO. DESCRIPTION 1 GND 2 TX+ 3 TX- 4 GND 5 RX- 6 RX+ 7 GND Table 3-21:

NANO-GX User Manual Page 51The 14-pin serial port connector connects to the COM 2 serial communications channels. COM2 is a multi function channel.

NANO-GX User ManualPage 52 The 10-pin serial port connectors provide RS-232 serial communications channels. The COM 2 serial port connectors can be

NANO-GX User Manual Page 53 Figure 3-23: LVDS LCD Connector Pinout Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 2 GROUND 1 GROUND 4 LVD_Y0-

NANO-GX User ManualPage 54 The 40-pin TFT TTL LCD connector can be connected to an LCD panel directly. Figure 3-24: TFT TTL LCD Connector Pinout Lo

NANO-GX User Manual Page 5538 FPHS 37 FPDE 40 FPENVEE 39 NC Table 3-25: TFT LCD Port Connector Pinouts 3.3 External Interface Connectors Figure 3-

NANO-GX User ManualPage 56 PIN DESCRIPTION PIN DESCRIPTION1 TX- 5 N/C 2 N/C 6 RX- 3 TX- 7 N/C 4 RX+ 8 N/C Table 3-26: Ethernet Connector Pino

NANO-GX User Manual Page 57 Figure 3-27: Mini-DIN 6 PS/2 Connector PIN NO. DESCRIPTION 1 KEYBOARD DATA 2 MOUSE DATA 3 GND 4 VCC 5 KEYBOARD CLOCK 6

NANO-GX User ManualPage 58 Figure 3-28: COM1 Pinout Locations 3.3.4 USB Combo Ports CN Label: CN28, CN29 CN Type: USB Combo ports CN Location: See

NANO-GX User Manual Page 59The standard 15-pin female VGA connector connects to a CRT or LCD monitor. PIN DESCRIPTION PIN DESCRIPTION PIN DESCR

NANO-GX User ManualPage vi 4.3.5 LCD Panel Shift Clock Jumper... 71 4.3.6 PC/10

NANO-GX User ManualPage 60 Chapter 4 4 Installation

NANO-GX User Manual Page 614.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the PM-LX2-800 may resul

NANO-GX User ManualPage 62 4.2.1 Installation Notices WARNING: The installation instructions described in this manual should be carefully followed

NANO-GX User Manual Page 63 All the items in the packing list are present  A compatible memory module is properly inserted into the slot  The

NANO-GX User ManualPage 64 o Serial port cable o Parallel port cable  The following external peripheral devices are properly connected to the ch

NANO-GX User Manual Page 65Step 1: Locate the SODIMM socket. Place the NANO-GX on an anti-static pad with the solder side facing up. Step 2: Align

NANO-GX User ManualPage 66 Figure 4-2: CF Card Installation 4.3 Jumper Settings NOTE: A jumper is a metal bridge that is used to close an elect

NANO-GX User Manual Page 67Description Label Type AT/ATX Power Mode Select JP2 2-pin header COM1/2 Port RI and Voltage Select (Optional) JP6 10-p

NANO-GX User ManualPage 68 Figure 4-3: AT Power Mode Select Jumper Pinout Location 4.3.2 COM1/2 Port RI and Voltage Select (Optional) Jumper Label:

NANO-GX User Manual Page 69 Figure 4-4: COM 1/2 RI and Voltage Select Jumper Pinout Location 4.3.3 CRT/LCD Mode Select Jumper Label: JP3 Jumper T

NANO-GX User Manual Page viiB TERMINOLOGY... 124

NANO-GX User ManualPage 70 Figure 4-5: CRT/LCD Mode Select Jumper Pinout Location 4.3.4 LCD Panel (LVDS/TTL) Voltage Select WARNING: Permanent d

NANO-GX User Manual Page 71 Figure 4-6: LCD Panel (LVDS/TTL) Voltage Select Jumper Pinout Location 4.3.5 LCD Panel Shift Clock Jumper Jumper Label:

NANO-GX User ManualPage 72 Figure 4-7: LCD Panel Shift Clock Jumper Pinout Location 4.3.6 PC/104-Plus VIO Voltage Select Jumper & SERIRQ Select

NANO-GX User Manual Page 73 Figure 4-8: PC/104-Plus VIO Voltage & SERIRQ Select Jumper Pinout Location 4.3.7 RS-422/485 Serial Port Select Jumpe

NANO-GX User ManualPage 74 Figure 4-9: RS-422/485 Serial Port Select Jumper Pinout Location 4.4 Chassis Installation WARNING: Airflow is critical

NANO-GX User Manual Page 75Quantity Type 1 ATA33 flat cable 2 RS-232 cables 1 KB/MS Y cable 2 SATA drive cables 1 SATA drive power cable Table 4

NANO-GX User ManualPage 76 Figure 4-10: IDE Cable Connection Step 3: Connect the cable to an IDE device. Connect the two connectors on the other s

NANO-GX User Manual Page 77the NANO-GX keyboard/mouse connector. See Figure 4-11. Step 3: Insert the cable connectors. Once the cable connector is

NANO-GX User ManualPage 78 4.5.3 Dual RS-232 Cable Connection The dual RS-232 cable consists of two connectors attached to two independent cables. E

NANO-GX User Manual Page 79refer to the reference material that came with the chassis.Step 0: 4.5.4 SATA Drive Connection The NANO-GX is shipped wit

NANO-GX User ManualPage viii List of Figures Figure 1-1: NANO-GX CPU Board Overview (Front Side)...

NANO-GX User ManualPage 80 Step 4: Connect the SATA power cable. Connect the SATA power connector to the back of the SATA drive. See Figure 4-14.

NANO-GX User Manual Page 81 Figure 4-15: Audio Kit Connection Step 3: Connect the cable to an IDE device. Connect the two connectors on the other s

NANO-GX User ManualPage 82 4.7 Software Installation All the drivers for the NANO-GX are on the CD that came with the system. To install the drivers

NANO-GX User Manual Page 83 Figure 4-17: Available Drivers Step 5: Install all of the necessary drivers in this menu. Step 0:

NANO-GX User ManualPage 84 Chapter 5 5 Award BIOS

NANO-GX User Manual Page 855.1 Introduction A licensed copy of Phoenix Award BIOS is preprogrammed into the ROM BIOS. The BIOS setup program allows

NANO-GX User ManualPage 86 F1 General help, only for Status Page Setup Menu and Option Page Setup Menu F2 Item help F5 Previous values for the pag

NANO-GX User Manual Page 87BIOS Menu 1: Award BIOS CMOS Setup Utility NOTE: The following sections will completely describe the menus listed below

NANO-GX User ManualPage 88  Load Fail-Safe Defaults Use the Load Fail-Safe Defaults option to load failsafe default values for each BIOS parameter

NANO-GX User Manual Page 895.2 Standard CMOS Features Use the Standard CMOS Features BIOS menu (BIOS Menu 2) to set basic BIOS configuration option

NANO-GX User Manual Page ixFigure 3-26: Ethernet Connector...

NANO-GX User ManualPage 90  IDE Primary Slave IDE device configurations are changed or set in the IDE Configuration menu (BIOS Menu 3). If an IDE d

NANO-GX User Manual Page 91 BIOS Menu 3: IDE Channel Master  IDE HDD Auto-Detection [Press Enter] Use the IDE HDD Auto-Detection option to enable

NANO-GX User ManualPage 92  None If no drives are connected to the IDE channel select this option. Once set, this IDE channel becomes inaccessibl

NANO-GX User Manual Page 93 Head The Head specification indicates how many logical heads are on the HDD installed in the system.  Precomp The Pr

NANO-GX User ManualPage 94 5.3 Advanced BIOS Features Use the Advanced BIOS Features menu (BIOS Menu 4) to configure the CPU and peripheral device c

NANO-GX User Manual Page 95 Disabled (DEFAULT) The system cannot be booted from a remote system through the LAN.  Enabled The system can be boo

NANO-GX User ManualPage 96  Boot Other Device [Enabled] Use the Boot Other Device option to determine whether the system uses a second or third bo

NANO-GX User Manual Page 97 Full Screen Logo Show [Disabled] Use the Full Screen Logo Show option to specify if the IEI logo appears during the sy

NANO-GX User ManualPage 98  4M  6M  8M (DEFAULT)  12M  16M  Flat Panel Configuration [Press Enter] Use the Flat Panel Configuration option

NANO-GX User Manual Page 995.4.1 Flat Panel Configuration Use the Flat Panel Configuration menu (BIOS Menu 6) to set the configuration settings for