Microcom 466 Manual do Operador descarregar pdf (Página 45)

Chapter 5 Printer Commands

466 Operators Manual 39

^A ^D COMMAND

24 Change SW4: Change software switch bank #4.

12345678

^ABxxxxxxxx

*******.)))))),

******.)))))),*

*****.)))))),**

****.)))))),***

**** 0000 = Not decoded (8 bit)

**** 0001 = Danish (7 bit)

**** 0010 = 860 (8 bit)

**** 0011 = Spanish (7 bit)

**** 0100 = 850 (8 bit)

**** 0101 = German (7 bit)

**** 0110 = 865 (8 bit)

**** 0111 = Swiss (7 bit)

**** 1000 = 852 (8 bit)

**** 1001 = French (7 bit)

**** 1010 = 863 (8 bit)

**** 1011 = Swedish (7 bit)

**** 1100 = 437 (8 bit)

**** 1101 = Italian (7 bit)

**** 1110 = British (7 bit)

**** 1111 = US English (7 bit)

****

***.)))))) 1=Auto-size on Power-up, 0=Disable

**.))))))) 1=Blow-hole Sensing Enable, 0=Disable

*.)))))))) Always 0

.))))))))) 1=Enable Slashed Zeros, 0=Disable

Position:

1 Slashed Zeros: If enabled, the printer will print the zero character with a slash.

2 Always 0

3 Blow-hole Stock: Enable this position when using blow-hole or cut-slot stock:

Stock that uses a hole instead of a gap to separate labels.

4 Auto-size on power-up: When enabled, the printer automatically sizes the label

stock when turned on. The printer then uses these header values for all

subsequent label formats. See the ^D39 command in section 5.3 for more

information on auto-sizing.

5 Code Page Selection

6 Code Page Selection

7 Code Page Selection

8 Code Page Selection

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 98 99

Comentários a estes Manuais

Sem comentários

Microcom 466 Manual do Operador Página 45

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Microcom 466